The steps taken during motorcycle restoration can lead to various challenges. The most important problem that you are likely to encounter includes finding the various surface finish for different parts with motorcycle paint colors. Making a decision on which part of painting or not to paint is bound to be a challenge whether the parts are powder coated, painted or plated. The final decision will have a hand to do with the cost and reliability of the component.
You will have to make a decision on whether to give your motorcycle a frame powder coated When the major consideration is for costs then it is affordable to paint the frame by yourself.
In case you have an old bike, you will find different mounting brackets. A major source for parts of your motorcycle includes the batteries, horns, and seats which are spread out..You can reduce the total costs for covering the restoration process by choosing to paint your bike on your own.
There are many spray paints available at different auto stores which can be accessed through the different kinds of pressurized cans. There are limited stock when it comes to different types of paints, but you can access various part of brackets.
Many painting experts recommend that for a good final finish, you should invest heavily in the preparation process. The amount of work that is needed for the application of the final paint finish is small compared to the preparation required. You should start by cleaning your bike. Taking pictures of the various parts when you disassemble can simplify the process.
Latex gloves should be worn especially during the preparation phase when spraying different components. The latex gloves will consequently protect your hands from the different parts of the natural greases and oils from your skin. You can encounter skin irritations when the spray products come into contact with your skin.
A decreasing tank should be used in cleaning the different components of the bike. At this stage, you should consider using a brake cleaner which guarantees that no residues will be left behind.
In case your component has rust or old paint, you can using grit basting. With a dry paper, you can wire brush the various items. Alternatively, you can blast making use of the different components through the use of baking soda which not aggressive in nature.
Before application of the filler material, you should consider spraying the specific area with a primer such as an etching primer. You can also prefer to powder coat the components to seal the components before application of any filler material.
The final procedure is painting of the components in application of the topcoat. It is essential to follow the common rules which regard spray painting for non-experienced painters. You can take up practicing on scrap material which resembles the similar composition of the components which you want to paint.